Zastava Arms Usa Zpap85 Magazine 5.56 30rd. Looking for a lightweight, high quality polymer magazine for your ZPAP85? These 5.56 magazines will be the perfect fit. The polymer frame contains a steel reinforced rear locking lug. The magazine has a BHO and follower that are also steel reinforced. They are tested at high and low temperature ranges and must exhibit consistent strength, resistance to shatter, and lubricity from -40deg C/F to +60deg C/140deg F. Polymer frame with steel reinforced rear locking lug. Last round BHO . Steel Reinforced Follower 30 round capacity. Fits ZPAP85 and similar models.
Zastava Arms Zpap85 Magazine 5.56 30rd
American Rifle Company Nucleus And Archimedes Receiver Wrench. Designed for use with both short and long action Nucleus & Archimedes receivers in either left or right hand. Made from steel. Designed to be softer than the receiver in order to protect the receiver. Overall length is about 8.5 inches. Hexagonal end fits a 9/16 inch wrench. The wrench must be used with the large lug oriented in the 12 o’clock direction relative to the receiver. Damage to the receiver guide rails may result if inserted in an alternate orientation.
Angstadt Arms, Llc 3-Lug/Blastwave Wrench. Two-sided tool provides a 3-Lug wrench for installation and removal of 9mm 3-lug muzzle devices and the Angstadt Arms QD Blast Shield.
Arrington Accuracy Works Ar-15/M16 Colt Law Enforcement Carbine Armorer’s Wrench. Dedicated, heavy-duty wrenches are designed to enable easy removal and installation of the proprietary barrel nut on the Colt LE6940 Advanced Law Enforcement Carbine . Self-contained Armorer Wrench features a large, 3/8″ thick handle with a 1/2″ square cutout for a torque wrench or breaker bar, plus a notch for removing the ALEC flash suppressor. Compact Barrel Nut Wrench has the 1/2″ torque driver/breaker bar cutout only.
Arrington Accuracy Works Ar-15/M16 Free-Float Handguard Strap Wrench. Heavy-duty strap wrench gives you plenty of leverage to remove screw-on free-float handguard tubes, even those sealed with thread locker or X”XfrozenX”X on by corrosion between the barrel nut and guard. Large, adjustable strap of tough, reinforced rubber wraps securely around any diameter handguard, with no risk of scratching the finish, and grasps the guard tighter as you apply pressure. Lets you position the strap right over the threaded end of the tube for maximum torque transfer where itX’Xs needed most. Hefty steel handle wonX’Xt bend, no matter how much force you apply, and machined aluminum head maintains optimal alignment of handguard, strap, and handle. Indispensable time-saver for professi
Badger Ordnance Recoil Lug Alignment Fixture. The Badger Ordnance Recoil Lug Alignment Fixture places recoil lug properly when installing barrel. It is compatible with Badger Ordnance Recoil Lugs as well as standard Remington recoil lug, Dakota Arms M97 Hunter and the Beretta Mato.