Manson Precision .715 Remington Bolt-Way Reamer. Steel reamer gives a precise .715″ bolt-way cut to correct any variance along length of any .700″ diameter bolt tunnel in the action. Tapered pilot bushing inserts into tang end of action to ensure straight reaming. Includes two .7145″ bushings for use with other Manson tooling. Bolt must be shimmed for proper fit in oversized way.

Manson Precision .715 Remington Bolt-Way Reamer
Manson Precision Bolt Face Truing Tools. Carbide facing burr requires only hand tools to cut the bolt face square and concentric to the boltway. Saves man hours and setup time. Tooling block locates in the front receiver ring; turn the facing burr with a slow speed drill motor. Use after bolt lapping and squaring receiver face.

Manson Precision Piloted Receiver Reamer. Cuts receiver thread minor diameter for the Piloted Tap/Mandrel. Cuts receiver lugs to equal heights. Must use with the Receiver Tap Bushings which are included with Manson Receiver Taps sold here. Available Standard or .010″ Oversize.

Manson Precision Receiver Ring Facing Cutter. Three, carbide cutters give even cutting pressure to square up the face of your receiver. Tapered handles let you turn the tool smoothly.

Manson Precision Remington 700 False Center. False center tool provides the gunsmith with an accurate and convenient way to center and securely support a Remington 700 bolt body in the tailstock when performing accurizing work on a lathe. Threaded end of tool tightens into the bolt body when the shroud and firing pin assembly are removed. Milled flats allow you to X”Xsnug-upX”X the tool with a wrench. The right tool for the job when squaring-up bolt lugs, recutting the bolt face, or using the lathe for any bolt body blueprinting operation. Machined from hardened, high speed tool steel for years of reliable service.

Mark Brown Custom Ar-15/M16 Carrier Carbon Scraper. Breaks loose and removes hard-to-get-at carbon buildup without damaging the bolt carrier. Quickly solves function-related cycling problems caused by excessive carbon deposits inside the bolt recess. Hardened steel scraper tip will last indefinitely with proper use.
